24/7 Phone Services 0086(371)86151827
Send to E-mail [email protected]
[email protected] Xincheng Science & Technology Building High-Tech Development Zone, Zhengzhou, China

steel storage tank for oil distribution fittings and attachments

steel storage tank for oil distribution fittings and attachments

steel storage tank for oil distribution fittings and attachments

In cylindrical tank walls, the longitudinal weld joints in adjacent shell courses, including compression ring welds, shall be offset from each other a minimum distance of 12 in. The butt-weld around the periphery of a thickened insert plate, or the fillet weld around the periphery of a reinforcing plate, shall be at least the greater of 10 times the shell thickness or 12 in. from any butt-welded seam or the bottom-to-shell or roof-to-shell joint. As an alternative, the insert plate (or the steel storage tank for oil distribution reinforcing plate in an assembly that does not require stress relief) may extend to and intersect a flat-bottom-to-shell corner joint at approximately 90 degrees.

Pipeline transportation of API 650 oil tank is not less than the maximum consumption of 3 to 5 days. The daily operating time of steel storage tank for oil distribution office buildings and fuel oil equipment is 12-16 hours; for high-end residential hotel buildings, the daily operating time is 16-24 hours.

In the event of continuous heavy rainfall, the inspection of the steel storage tank for oil distribution farm should be strengthened to monitor and pay close attention to the soil moisture content of the tank farm in order to quickly take emergency measures. Check whether the seals of the oil unloading port and the oil measuring port are in good condition in time to prevent rainwater from leaking into the steel storage tank for oil distribution from the oil unloading port and the oil measuring port, which will affect the oil quality.

Previous : API620 steel storage tank shapes tank shell

Next : API650 petroleum storage tank convective water parameters

Leave a message

Client Image 1
Client Image 2
Client Image 3
Client Image 4
Client Image 5
Client Image 6
Client Image 7
Client Image 8
Client Image 9
Client Image 10
Client Image 11
Client Image 12