24/7 Phone Services 0086(371)86151827
Send to E-mail [email protected]
[email protected] Xincheng Science & Technology Building High-Tech Development Zone, Zhengzhou, China

Horizontal oil transportation vessel and tank top shell

Horizontal oil transportation vessel and tank top shell

Horizontal oil transportation vessel and tank top shell

When the horizontal oil transportation vessel and tank top shell course is the minimum thickness indicated in 5.10.4, Table 5-6 and Figure 5-6, details a – e, h and i, the minimum anchorage shall be designed for normal loads as specified by the Purchaser and by this standard. See 5.11.2.3 for the allowable stress. When the top shell course is thickened beyond the minimum thickness provided in Table 5-6 or as in Figure 5-6, details f and g, or a knuckle is used, the minimum anchorage shall be designed for three times the internal design pressure. The allowable stress for this loading is 90% of the minimum specified yield strength of anchorage material.

horizontal oil transportation vessel and tank weld tightness test: remove dirt from the horizontal oil transportation vessel and tank weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.

API 650 petroleum storage tank stipulates that if the thickness of the lower siding obtained by calculating the anti-overturning moment is greater than the thickness of the horizontal oil transportation vessel and tank hydrostatic pressure test (both do not include the corrosion margin), the calculated thickness of the above siding required by the hydrostatic pressure is It should also be increased by the same proportion, unless special analysis is performed to determine the seismic overturning moment and corresponding stress at the bottom of each layer of API 650 petroleum storage tank wall.

With a high-quality and complete after-sales service system, the company solves the user's hindrance and improves the reliability of steel horizontal oil transportation vessel and tank product quality. Reaching every corner of the globe with professional services, users anywhere can get thoughtful and detailed services form us is our pursue. We promise all our steel materials are manufactured and tested in accordance with responding standards. We will take full responsibility for the quality of the steel materials we provide.

Previous : EN 10025 S275 plates fixing roof oil storage tank

Next : API620 cylindrical tanks conical shell-reducer sections

Leave a message

Client Image 1
Client Image 2
Client Image 3
Client Image 4
Client Image 5
Client Image 6
Client Image 7
Client Image 8
Client Image 9
Client Image 10
Client Image 11
Client Image 12